Raymarine Race Master Quick Start Manual For - page 8
Depth
Depth is indicated using a fixed scale 0 to 20m with zero at the bottom
of the graph. Each segment of the graph corresponds to 1m of depth.
The bar graph always indicates depth in metres, even if other depth
units are chosen for the digital display.
Speed Trim
Speed trim is indicated using a default scale of +/- 25 percent about a
central zero. The scale can be set between +/- 25 and +/- 100 percent
in setup.
Additional Micronet Functions
If other Raymarine Transmitters or external NMEA devices are connected to
the network, additional modes and data pages are available. See the Race
Master System guide for details
Setup and Calibration
To enter setup mode, press and hold
for two seconds from any data
page except Wind Shift (WND) or Timer (TMR).
Setup mode is structured into Chapters, each containing one or more
related Pages
The
button scrolls through the Chapters. The
and
buttons scroll
forward and back between pages. Scroll to the chapter heading page
before changing chapter.
To change a setting: press
, the changeable value flashes, use
and
to edit the value.
To toggle a two state value, press
.
For details of setup mode, see the full user guides.
Quick start guide for Race Master
6
www.raymarine.com