Raymarine Race Master User Manual - page 16
Race Master
14
5.3
Editing Setup Data
Parameter values may be one of three types:
A user editable numeric value (for example, the magnetic variation
may have the value 03 degrees).
To edit a numeric parameter value:
Press
. The value data will begin to flash.
Use
and
to adjust the value.
Press
again to set the new value.
A list of options (for example, the heading response parameter may
have the values SLO , mED or FASt).
To select a parameter option from a list:
Press
. The parameter option will begin to flash.
Use
and
to select the option required.
Press
again to set the new option.
A toggle between two alternative options (for example the keylock
parameter can be either ON or OFF).
To toggle between alternate parameter settings
Press
. The setting will toggle between the options.
5.4 Setup Parameter Descriptions
In the descriptions below, system default values are shown in bold text
Compass Chapter
Heading Response
Sets the update period of the compass display.
Auto (automatic), SLO (slow), mED (medium), FASt (fast).
Compass Offset
Aligns the displayed heading with the actual magnetic heading of
the boat (see page 17 for the calibration process).
The live heading is shown on the lower line of the bottom pane,
with the applied offset on the upper line shown as +/- degrees (0
to +/- 180).