Rip Curl 17119 Instruction Booklet - [ Tr ] Countdown Timer:

Your chronograph will count in 100th of a second from 0 to 9

hours, 59 minutes, 59 seconds and has a 10 Lap memory.

In Chronograph mode, simply push the START/STOP to start

and stop the Chronograph. To reset, press and hold the LAP/

RESET button when the Chronograph is stopped. Watch will

reset to 00’00”00

To record a Lap-time push the LAP/RESET button while the Chronograph is

running. The digits will stop to show the lap-time. Push the LAP/RESET

button again and the accumulated time will re-appear on your screen. (This

procedure can be repeated for up to 10 laps).

To  review your lap times, when the chronograph is stopped, press LAP/

RESET repeatedly to display each consecutive lap time.

Notes: 1. To view the current time and date, while the Chronograph is running,

simply press the MODE button three times. The Normal Time screen will

appear. 2. The Chronograph screen will display the accumulated time in

Minutes, Seconds and 1/100 Seconds until the accumulated time is 1 hour,

after which the screen will display Hours, Minutes and Seconds.

[ TR ] Countdown Timer:

A count down timer can be used for time keeping a fixed period

of time with a duration from 1 second to 23 hrs, 59 min, 59

sec.

In [ TR ] Modes, simply push the START/STOP to start and

stop the Timer. The running time is displayed in the main screen

with the fixed time on top.

To reset, push the LAP/RESET to return to the preset value while the timer

is stopped.

4 warning beeps will sound for the last 5 seconds with a long beep at the

end of the countdown time.

Note: To view the current time and date, while the Timer is running, simply

press the MODE button twice. The Normal Time screen will appear.

46