Rip Curl 17119 Instruction Booklet - Tide Display Map
8
TIDE DISPLAY MAP
Mid tide
Indicates that the
tide is going low
Indicates that the
tide is going high
Peak low tide
Peak high tide
Below
Above >2.0m (6.5ft)
>1.8m (5.9ft)
TIDE SETTING
-Press MODE/SET to advance to TIDE MODE.
-HOLD MODE/SET in for 2 seconds to enter beach setting.
-To toggle between REGIONS use START/STOP & LAP/RESET.
When you find desired region press MODE/SET.
-Use START/STOP & LAP/RESET to toggle through to your desired COUNTRY.
Press MODE/SET to lock in your country.
-Use START/STOP & LAP/RESET to toggle to desired STATE.
Press MODE/SET to lock in your state.
-Use START/STOP & LAP/RESET to toggle to desired BEACH.
-HOLD MODE/SET in for 2 seconds to save selected beach.
** Remember to HOLD MODE/SET or your new beach will not be saved.
The next tide time will appear in the screen. The tide time will be numbered depending on if it’s
the 1st or 4th tide of the day. Some beaches can have up to 6 tides per day so the watch will
show all possible tides in any one day up to 6.
-You can use the START/STOP to toggle through the tide times and range for today and
tomorrows tides. Today’s tides will be numbered 1 to 6 or 1 to 4 depending on the beach e.g.
H1, L2, H3, L4, H5, L6. As you continue into tomorrow’s tide times, the tides will also be
numbered 1 to 6 but so you can identify tomorrows tide times when a + symbol appears in
screen after the tide time.
You can use LAP/RESET to toggle back though the tide times.
If no button is pushed for 30 seconds the current next tide time will re appear in the screen.
REGION
COUNTRY
STATE
BEACH
Tide Range Gauge
Tide Height Gauge
PLEASE SEE PAGE 22 FOR TIDE LOCATIONS BEACH LIST
CUSTOMIZE A PRESET BEACH
In the case where one of the 200 preset beaches isn’t your local beach you can CUSTOMIZE
the tide data for any of the 200 preset beaches to match your beach.