Rip Curl ATS Oceansearch Instruction Manual - Chronograph (Stop Watch)

2 secs

Lap Time

Chrono Lap

CHRONOGRAPH

CHRONOGRAPH (STOP WATCH)

-Press the MODE/SET button to advance to CHRONOGRAPH.

-Press START/STOP to start or stop the chronograph.

-Press LAP/RESET to time lap times while the chronograph is running.

-Hold LAP/RESET to reset the chronograph when in stop start. The maximum number 

of laps is 99.

HEAT TIMER (COUNTDOWN TIMER)

USING THE HEAT TIMER

-Press MODE/SET to advance to HEAT TIMER.

Your watch timer is preset to 30 minutes. 

-Press START/STOP to start or stop the Heat Timer.

-HOLD LAP/RESET for 2 seconds to reset the heat timer.

SETTING THE HEAT TIMER to another time period, up to 24 hours.

-Hold MODE/SET for 2 seconds, the hour digits will appear and flash. Use START/STOP 

& LAP/RESET to select hour you want.

-Press  MODE/SET,  the  minutes  will  flash.  Use  START/STOP  &  LAP/RESET  to  select 

minutes required.

-HOLD MODE/SET for 2 seconds to confirm the time set.

ALARMS

A separate alarm is provided for each time zone.

Alarm beep can be stopped by pressing any button.

SETTING THE ALARM

-Press MODE/SET to advance to ALARM.

-HOLD MODE/SET for 2 seconds and T1 or T2 will appear.

Use START/STOP & LAP/RESET to select required time zone T1 or T2.

-Press MODE/SET, the hour digits will flash.

12

NOTE: After 30 seconds, If no buttons are pushed the screen will revert to the current 

day’s date and tide data.