Rip Curl ATS Oceansearch Instruction Manual - Setting The Time and Date.
5
(A)
LIGHT / RETURN
(B)
MODE / SET
(D)
START / STOP
(C)
LAP / RESET
LIGHT/RETURN
MODE/SE
T
SETTING THE TIME AND DATE.
-Ensure you are in Time, Tide, Date mode.
-Press MODE/SET to advance through the modes.
-HOLD down MODE/SET for 2 seconds to enter setting mode.
-Press MODE/SET to advance through Year, Month, Day/date, Hour, Minute, 12/24 Hour
format, Hourly chime, Key tone.
-Press START/STOP to increase current value. Press LAP/RESET to decrease
current value.
-Once complete, you must HOLD down MODE/SET again to exit setting mode and
save any adjustments.
DUAL TIME FEATURE –
Your watch is equipped with a second time zone function.
-Press LAP/RESET to VIEW secondary time zone.
-HOLD LAP/RESET for 5 seconds to change to secondary time zone, T2 will appear
and stay displayed in the bottom left hand corner of your watch. When in T1 no icon
is visible in the screen.
DAYLIGHT SAVINGS TIME (DST) –
HOLD START/STOP for 5 seconds and your watch will automatically adjust to Daylight
Savings Time. DST will appear in the bottom left corner of your watch.