Riva RC4602SV01-2017-A Quick Installation Manual

Summary of RC4602SV01-2017-A

  • Page 1

    Rc4602sv01-2017-a 1 quick installation guide this manual provides the instructions for the quick installation and the basic configuration of your camera with the 30x optical zoom. 1. Connect cables to ip device connect the required cables to the device including a power cable and a lan cable. To see...

  • Page 2

    Rc4602sv01-2017-a 2 2. Install ip device 1) loosen the three screws on the top of the camera, and detach the safety ring from the top. 2) twist the top of the camera counter-clockwise to separate it from the main body, and push the lever of the plastic cover at the bottom of the top outward to open ...

  • Page 3

    Rc4602sv01-2017-a 3 3. Set the lens position the device is a 360° rotating camera and it is fully controlled by the web user interface. Once the installation is complete and it is properly connected to the network, please refer to the webpage user’s manual for the camera configuration instructions. ...

  • Page 4

    Rc4602sv01-2017-a 4 custom ip environment please access our website and download necessary ipadmintool first: http://www.Rivatech.De/en/downloads/software ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes...

  • Page 5

    Rc4602sv01-2017-a 5 5. View video on web page installation of activex control once the device’s proper ip address has been identified, type the url in a web browser to access the camera. At first time access, installation window may pop up. 1. When the browser asks to install the axumf software, cli...

  • Page 6

    Rc4602sv01-2017-a 6 6. Reboot perform the following procedures to reset your device: on the device 1. Press the reset button for 2 seconds while the device is powered on. 2. Wait for the system to reboot. Caution ! Please do not hold the reset button for more than 2 seconds. Otherwise, the camera ma...

  • Page 7

    Rc4602sv01-2017-a 7 8. Safe mode your device will get restarted in safe mode if the device does not completely boot certain times. The errors are mainly caused by these factors below: * the power supply is continually unplugged certain times in the middle of system booting. * the firmware files requ...

  • Page 8

    Rc4602sv01-2017-a 8 hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1 1 26 38 4b 75 70 112 95 149 ba 186 df 223 2 2 27 ...