Riva RC6702HD-6311 Quick Installation Manual - page 3
RC6702(63)03-2014-B
3
3. Adjust angle of the camera
1) Adjust the camera to the desired angle by unscrewing the joints referring to the following pictures.
2) Connect to the web page of the device to see its real-time image in order to check whether its angle is
correctly adjusted. Refer to 5. View video on web page for details about using its web page.
*To quickly check if the angle is correct, the camera can be connected to an analogue video test monitor
using the video output cable (included in the package) and the NTSC/PAL button.
4. Adjust Zoom and Focus
* To adjust zoom and focus, it is necessary to connect the device to a network.
Please refer to 5. Set up network environment and 6. View video on web page for the detailed method.
Once you are on the webpage, go to Setup> Video & Audio> Zoom/Focus. Then, you will see the features
like below.
1) Adjust zoom and focus by clicking arrow buttons: the buttons
move the lens more extensively
than the buttons
.
2) Click One Click Focus to automatically set the lens.
*Refer to the “RIVA Web Interface Manual Full HD Line”. for more detailed configuration about zoom and
focus on the webpage. All Manual’s and Installation Guides can downloaded from
www.rivatech.de
homepage
Adjust the joint to install
the camera on the wall.
Tilting adjustment
Panning adjustment