SAB Heli Division Goblin 570 User Manual - page 21

1

2

3

1

4

FBL Assembly

Double- sided Tape

FBL support

(H0250-S)

Socket Head Cap M2.5x6mm

(HC018-S)

Finishing Washer

M2.5

(H0255-S)

FBL System Installation

We recommend the use of a one unit flybarless system, i.e. Mini vBar, Microbeast, etc. However, a two unit flybarless system can also 

be installed. 

For one unit systems, the unit is installed as shown in position 1. See Fig 1,2,3.

Position 2 and 3 can be used for RX System. See Fig 1,4.

Two unit FBL systems can be installed as follows: control unit in position 1 and sensor in position 4 or vice-versa. See Fig 5. 

To obtain the position 4 use H0313 [Bag 8.1].

FBL

BEC/RX Support

(H0309-S)

Socket Head Cap 

Screw M2.5x8mm

(HC020-S)

Finishing Washer M2.5

(H0255-S)

Electronic 

Support

(H0313-S)

Copyright © 2014 - SAB Heli Division - All rights reserved

Page 19

Chapter 11, Installation of FBL & RX