SADiE LRX2 User Manual - Lrx2 Panel Quick Start
7
LRX2 PANEL QUICK START
Faders can be changed to operate on a different Bank with the Bank Select button, or for different functions -
Output faders, pan or Input level (Mic inputs only) - with the button below the Bank button.
Record Enables operate on the playlist stream of the appropriate number, and not necessarily the stream
that is feeding that fader. In MTR software the stream and fader are always the same number, but a full SADiE5
mixer could be customised so that for instance all output faders were stereo, and then faders 1-8 would be
controlling level of streams 1-16. Be careful – if you have stereo merged streams in a full SADiE5 EDL then two
buttons will enable/disable them – so for instance pressing button 1 will record enable streams 1&2, but then
pressing button two will disable them.
The Record All button above the wheel is a much quicker method of record enabling many streams than
individually pecking single buttons. Record All record-enables only selected streams and therefore if you want to
exclude streams from record, you should press the button that shows the stream’s name or number. De-
selected streams display with a darker grey background and the button appears “up”.
Metering LEDS on the panel - these give indication of level on the physical output of the appropriate
number (and thus in full SADIE5 software this is not necessarily the same output that the fader is feeding). You
can choose the level at which each LED lights in the software Setup page, under the “H64” topic. Meters are
also displayed in the software beside the stream in both SADiE MTR, and SADiE5 (you may need to display
these with a right-click in the left side of the EDL in SADiE5)
PFL is automatic in the MTR software, and will PFL-solo that stream to the Headphone outputs. In SADIE5
software a PFL button has to be applied to each stream (ALT-Drag a Aux Send button from the mixer palette)
and then you must route a Bus called PFL to whichever output you wish to listen to the PFL on. Thus pressing
the PFL button (software or hardware) routes that fader to the PFL bus. There is a Mixer Setup switch to
make these buttons perform the normal Solo function instead of PFL.
Bank Select moves the faders on to controlling the next set of 8 mixer strips. Shift-Bank moves backwards
to the previous 8.
Talkback - pressing and holding this button opens the auxiliary mini-jack input on the right hand side of the
LRX2 unit and this (as of v5.5.3) will be monitored on the Mon L/R and Headphone Outputs, and can be
optionally set to record a “Slate” to the stereo mixdown stream.
Monitor and Headphone Outputs are available in the SADIE5 software as additional output busses called
Mon L&R and H/P L& R which can be routed in the normal way. In the MTR software these always monitor
the Mixdown stereo stream (except when PFL is pressed)
Headphone Output Level is adjusted using the rotary knob beside the headphone jack.
Master Fader In MTR software this provides a master mix level to the mixdown stream. In full SADiE5 this
can be assigned to any fader by right mouse clicking on that fader and ticking the Master Hardware Fader item.
This setting saves with the mixer.