Saeco RI9826/11 Operating And Maintenance Manual - Beverage Settings
19
BeVerage settings
The following page describes how to program coffee beverages; the programmable settings for each beverage
may differ depending on the type of beverage.
PrOgraMMing frOM the “BeVerage settings” Menu
To adjust the settings for preparing beverages: press the
button and select “beverage settings” by
navigating the click wheel with your fi nger.
in this phase you can:
exit the programming mode
(see page 21)
navigate the click wheel with your
fi nger to select:
- the quantity of coffee to brew;
- the coffee temperature;
- coffee prebrewing.
-adjust the quantity of coffee to be ground;
- adjust the coffee temperature;
- adjust coffee prebrewing.
restore factory settings
save the new settings
Every beverage can be programmed according to your individual tastes.
QuicK PrOgraMMing
You can program the quantity of coffee that will dispense into the cups when any beverage is selected.
Select the type of beverage you want to program, then press and hold the
button until the display
shows (for example):
The machine dispenses coffee.
When the desired amount is reached, press the
button again.
The display shows:
The dispensed quantity of coffee is memorized and replaces any previous settings.
programming
espresso coffee
saved
espresso coffee
1 beverage settings