Saeco RI9826/11 Operating And Maintenance Manual - Programming The Machine
22
Machine settings
2.1 language
English
2.6 cup-warming surface
off
2.3 acoustic alarm
on
2.4 water filter alert
on
2.5 rinsing
on
2.2 water hardness
3
2.7 clock setting
To change the machine operation settings, press the
button, select
“machine settings” and press the
button. Navigate the click wheel with
your finger.
Change the display language.
Change the machine water hardness setting.
With the water hardness function you can adjust your machine to the
level of hardness of the water you use, so that the machine will request
descaling at the right time.
Measure the water hardness as shown on page 6.
Activate/deactivate the acoustic tone each time a button is pressed.
Activate/deactivate the message to replace the water filter. By activating
this function, the machine informs the user when the water filter needs
to be replaced.
Clean the internal circuits in order to guarantee that beverages are only
made with fresh water.
this function is activated by default by the manufacturer.
Activate/deactivate the cup warmer located on the top of the machine. A
warm cup allows you to fully savor the coffee and taste its full aroma.
Set the current time on the machine.
Set the time format. The machine can also display the time in the
American format (am/pm).
Set the current date (day, month, year, day of the week).
Set the date format. The machine can also display the date in
American format (MM/DD/YYYY).
Set the current time, date and format you wish to display.
2.7.4 date format
DD/MM/YYYY
2.7.3 date setting
tuesday 18/04/06
2.7.2 time format
24h
2.7.1 time setting
16:54
2 machine settings