Saeco RI9826/11 Operating And Maintenance Manual - Maintenance

26

7

8

9

10

12

11

6

4

5

When the above message 

appears, the boiler is at the right 

temperature.

Press the 

 button to start.

insert descaler

ok to start cycle

insert descaler

ok to start cycle

When the solution is fi nished 

the following message appears 

on the display:

Remove the water tank, rinse 

with fresh drinking water to 

eliminate traces of descaling 

solution, then refi ll with fresh 

drinking water.

The machine begins to dispense 

the descaling solution through 

the hot water/steam wand. 

The dispensing occurs at 

predetermined intervals, in order to 

allow the solution to settle.

The intervals are displayed in 

order to check the progress of the 

descaling cycle.

descaling cycle

please wait

passage

[ 2/15]

fill the

water tank

Maintenance

Turn the knob to the 

position.

Place a container beneath the hot 

water/steam wand.

open

water/steam knob

Pour the entire content of the 

Saeco concentrated descaling 

solution into the water tank, and 

then fi ll the tank with fresh drinking 

water up to the MAX level.

Place the tank back into the 

machine.