Saey 200+ series Operating Instructions Manual - page 6
6
6. PRECAUTIONS
A stove gets hot, especially the covering plate, the casing and the glass
panel!
Install your stove in a safe place in order to prevent playing children from
touching it.
Even if all the safety regulations are observed, there is still a risk of
accidents occurring.
KEEP SMALL CHILDREN AT A SAFE DISTANCE.
7. LIGHTING THE STOVE –THE STANDARD PROCEDURE
When the stove is lit, open the air sliders by sliding them outwards.
Open the door with the glass panel and put crumpled newspapers over
the floor, with a handful of splintered wood (thin wood) on top of it. After
the stove has been lit, the door with the glass panel must be firmly closed.
IMPORTANT : the door with the glass panel should not be opened again,
except for the purpose of topping up.
8. WOOD COMBUSTION
8.1 Topping up
To stoke the fire, open the air slider to its maximum.
The logs should be inserted through the door with the glass panel or the
right-hand filler door and placed on the still sufficiently glowing base, in no
more than two layers. Do not overfill.