SAFERA PCU6.1-F Installation Manual - page 7
13
12
PCU6.1-P - Installation
1-phase, 3-pin plug.
Optional
AUX and water
sensor connections.
See chapter 5.
4
3
6
4xA A
A
A
B
2xB
Connect
the stove
with 3-pin
plug.
7
2
L
N/L
PE
IN
5
239 mm
40 mm
113 mm
ON
8
OFF
1
ѥ
WARNING
Make sure that there is no power sup-
ply to the cooker and the oven by re-
moving their fuses. Also ensure that
the cooker is switched off.
OUT-wires are always energized when
the power control unit is connected
to the electrical network. If a wire is
loose, it must be properly covered.
⚐
ATTENTION
Install the power control unit
Ⓒ
so
that it is not exposed to moisture.
Check that all cables can move freely.
If you are replacing the cooker or the
power control unit, see chapter 4
manual adjustment mode.
Do not install the power control unit
to excessive heat: See operational
ambient temperature on the power
control unit
Ⓒ
.
* Check specifications on the cover
of the Power Control Unit.
OUT
IN
PE
L/N
L
PE
N
L
230 V MAX. 25 / 32 A *
MICRO DISCONNECTION
226 mm
99 mm
95 mm