Safescan 2985-SX User Manual - 1. Speed
www.safescan.com
CLR
CLR
BATCH
+1/+10
CUR
MODE
ADD
REP
MIX
R:
S:M
15-12-2015
12:05
PCS
0
VAL
0
****
B:---
USER MENU
1 : SPEED
2 : SERIAL NUMBER SCANNING
3 : REJECT POCKET CAPACITY
4 : DATE TIME
5 : VERSION
6 : ALARM BEEP
MENU
3. USER MENU
Press the [MENU] button to access the user menu. In this menu the following settings can be adjusted:
•
Browse with the arrow keys (and buttons) to [1: SPEED] and press to access the menu.
•
Select the desired count speed using the arrow keys: [1] = slow [2] = medium [3]= fast.
•
Press to confirm your selection. A confirmation message appears.
•
Press to go back to the main page of the user menu. Press again to exit the user menu. Default setting is
Speed 2.
1. SPEED
For some currencies it is possible to scan the serial numbers of the counted banknotes and provide a serial number report
after counting.
•
Browse with the arrow keys ( and buttons) to [2: SERIAL NUMBER SCANNING] and press to
access the menu.
•
Select serial number scanning [ON] or [OFF] using the arrow keys ( and ). Press to confirm your
selection. A confirmation message appears.
•
Press to go back to the main page of the user menu. Press again to exit the user menu. Default setting
is Serial Number scanning Off.
2. SERIAL NUMBER SCANNING
The reject is pocket is used to place suspected counterfeit banknotes in, or to discriminate the banknotes when using
FACE and / or ORIENT count modes.
•
Browse with the arrow keys (and buttons) to [3: REJECT POCKET CAPACITY] and press to
access the menu.
•
Select the desired pocket capacity to 50, 40, 30 or 20 banknotes using the arrow keys. Press to confirm your
selection. A confirmation message appears.
•
Press to go back to the main page of the user menu. Press again to exit the user menu. Default setting
is 50 pcs.
3. REJECT POCKET CAPACITY
MENU
ADD
REP
MENU
ADD
REP
ADD
REP
MENU
MENU
ADD
REP
MENU
MENU
ENGLISH