Safety Basement SB-CC8434 Instruction Manual - Recording
Page 12
PRODUCT MANUAL
Multi-Functional Clock Camera : SB-CC8434
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
RECORDING
1. With the clock in Stand By Mode (see previous step), press the Motion Activated
Recording button on the Remote Control.
2. The status light will go dark. It is waiting for motion before starting.
3. Wave your hand in front of the camera and the status light will blink 2 times. You are
recording in Motion Activation Mode.
4. To stop recording, press the Motional Activation Mode button on the Remote Control. The
blue status light will appear. You are now in Stand By Mode.
NOTE: Your clock will record for 3 minutes when motion activated. It will continue to record
additional 3 minute videos as long as motion is detected.
MOTION ACTIVATED
1. With the clock in Stand By Mode (see previous step), press the Video Recording button on
the Remote Control.
2. The status light will blink 3 times, then go dark. You are now recording.
3. To stop recording, press the Video Recording button againon the Remote Control. The blue
status light will appear. You are now in Stand By Mode.
NOTE: Your clock will save a video file every 3 minutes in standard mode.
STANDARD VIDEO
1. With the clock in Stand By Mode (see previous step), press the Audio Recording button on
the Remote Control.
2. The status light will blink 1 time, then go dark. You are now recording audio only
3. To stop recording, press the Audio Recording button againon the Remote Control. The blue
status light will appear. You are now in Stand By Mode.