Safety Basement SB-CC8434 Instruction Manual - Before First Use - Sd Card
Page 4
PRODUCT MANUAL
Multi-Functional Clock Camera : SB-CC8434
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
The Clock Camera must have an SD card inserted to work properly. It will accept a Micro SD
card of up to 16 GB in size.
1. The SD card slot is located on the back of the device.
2. Gently place the SD card into the slot as shown, with the gold connections facing DOWN
and the printing facing UP.
3. Gently push the SD card into the slot. It will click into place. DO NOT FORCE the SD card
into place. If there is any resistance, remove the SD card. Check the position of the card, and
try again.
An incorrectly inserted card may damage your device and void your warranty.
4. When the SD card is properly inserted, it will look like the bottom picture.
BEFORE FIRST USE - SD CARD
Step 2 - SD card partially
inserted into SD card slot
Wrong! This SD card is upside-
down.
This SD card is properly
inserted.