Safety Vision 7000-NVR User Manual - page 24
Network Settings
The Network Settings page
configures the WLAN interface and
Mail server settings.
NVR Detail
NVR name:
Enter the name of the
NVR
Restrictions:
Only alphanumeric
characters are allowed with a
maximum length of 15 characters.
Names with “_” (underscore) are also
accepted. No other special characters
can be used for “NVR Name”.
Main Network Interface
IP Address:
IP Address of the NVR for Main Network
Interface connected to wireless access points.
Netmask:
Netmask of NVR for Main Network Interface
connected to wireless access points.
Gateway:
Gateway IP Address of NVR for Main Network
Interface connected to wireless access points.
Show/Hide Network Information
User will have to click on particular checkbox to view
configured network related information.
Mail Server
If enabled, mail will be sent when event is triggered. If
disabled, mail will not be sent on event.
Server IP Address:
Mail Server IP address which is used to
send e-mails if any event generated on NVR.
Username:
Username which is used to login into Mail Server
for sending emails regarding any event generated on NVR.
Password:
Password which is used to login into Mail Server
for sending emails regarding event generated on NVR.
Port Number:
Contact your IT administrator for Mail Server
Port Number
Mail to:
Email Address to which all emails will be sent
regarding any event generated on NVR.
Mail from:
Email Address from which emails will be sent
regarding any event generated on NVR.
LiveTrax
If enabled, LiveTrax Server will be able to receive and send
packets to NVR. If disabled, LiveTrax Server Application will
be stopped.
Server IP address:
IP Address of the LiveTrax Server.
Send Port:
Data packet is sent to LiveTrax server from this
port to NVR. The valid port range is 1025 to 65535.
Receive Port:
Data packet is received from LiveTrax server
to this port of the NVR. The valid port range is 1025 to 65535.
Gateway:
LAN IP address of router where livetrax server is
connected.
Netmask:
Netmask of LiveTrax server
SafetyNet Server Announce
If enabled, SafetyNet Server will be able to accept Web
Requests on specified server port. If disabled, SafetyNet
Server Application will be stopped.
Server IP address:
IP Address of the SafetyNet Server.
Server Port:
Web Request is sent to SafetyNet server to this
port. The valid port range is 1025 to 65535.
Gateway:
LAN IP address of router where SafetyNet server is
connected.
Netmask:
Netmask of SafetyNet server.
oMG Server
If enabled, oMG Server will connect with specified TCP port.
If disabled, oMG Server Application will be stopped.
Server IP address:
IP address of the oMG Server
Server Port:
TCP port of the oMG server. The valid port
range is 1 to 65535.
Default Routing
Option to configure default routing option.
Web Port
Option to configure NVR web port.
Click
Save Changes
to save changed entries.
ROADRECORDER 7000 NVR USER GUIDE
22