Safety Vision SAFESTOP-HD User Manual - Configuration
7
Configuration
Click Manage on the upper right corner of the screen to access
the SAFESTOP-HD’s configuration menus. Access different
pages by clicking the links on the left side of the screen.
Date & Time
The Date & Time page defines
the date and time of the
SAFESTOP-HD and how it is
displayed on video it records.
Current Server time
“Server” in this case refers
to the SAFESTOP-HD. The
currently set time is displayed
in the Date and Time fields.
new Server time
Select the current time
zone in the Time zone field,
then select or unselect the
Automatically adjust for
daylight saving time changes
option.
In the Time mode field,
select either Synchronize
with computer time or
Set manually. Ensure the
computer’s date and time is set
correctly before synchronizing
with it.
When finished, click Save at the bottom of the screen.
Date & time format Used in images
The fields in this section determine how the date and time is
displayed as metadata on recorded video. Select Predefined,
then select a format from the drop-down menus.
When finished, click Save at the bottom of the screen.
NOTE: The SAFESTOP-HD’s firmware
version and MAC address are displayed
on the Instructions page, under the Basic
Setup menu.
NOTE: For help specifying your own date
and time formats, contact Safety Vision
Technical Support.