Saint ST 2004 User Manual - page 4
SAINT
4
Disarming the Security System (Using the Transmitter)
Press and release the Disarm/Unlock button on the transmitter. The security system will respond
as follow:
A. The siren will chirp two times.
B. The LED indicator will be off.
C. The parking lights will flash two times.
NOTE: If you are disarming the security system after it has been triggered and the horn/siren
is sounding, the disarm chirps are automatically deleted.
The Security System is now Disarmed!
Valet / Override Switch Operation
Remote mobile security systems are supplied with a push button valet switch. The valet switch is used
to override the security system in the event that the transmitters are lost or fail to operate or
to put the security system in non-operational mode (valet) for vehicle servicing, etc.
Override Operation by the Valet Switch (Security system is Armed)
1. Enter the vehicle. (System will begin sounding at this point)
2. Find it valet switch location.
3. Place the ignition key into the ignition switch and turn the ignition switch to the ON
position.
4. Within 5 seconds of turning on the ignition key, push and hold to valet switch.
5. Turn off the ignition (The horn/siren will stop sounding)
6. The LED indicator will be continuously on.
The security system is overridden and is now in the Valet mode!
How to get out of valet mode (by the Valet switch)
1. Turn on the ignition key
2. Push and hold to valet switch.
3. Turn off the ignition key.
4. Release to valet switch.
5. When the LED is off, you are out of the valet mode.