Salcom 12-86-9000 Product Manual - page 4
P a g e
| 3
12-86-9000 CALLPOINT TRANSMITTER
Product Manual
Sea Air and land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
April 2017
Product Overview
The 12-86-9000 is a small, low cost, high specification Paging transmitter integrating the Salcom
12-86-5000 Paging Transmitter PCB and inherits all 12-86-5000 type approvals.
The 12-86 range of products are POCSAG direct to pager transmitters, allowing low cost
systems to be developed since intermediate receivers and transmitters are not required for
short range applications.
12-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-
character message. Programming can either with a serial programming cable that can be
purchased separately or preprogrammed when supplied.
Although the 12-86 is a low power transmitter, when used as a callpoint paging transmitter a
direct line of sight range of up to 800 metres can be expected. When used within buildings the
range will be reduced depending on the building, but still will be significant.
The 12-86-9000 fits the form factor of many standard electrical face plates, so that the
transmitter can remain in keeping with surrounding switchgear in cosmetically sensitive areas.
By default the 12-86-9000 is supplied with a mounting block, but can be flush mounted in the
same manner as most electrical switch plates if required.
The 12-86-9000 is available in 2 sizes, and is also available in black. By default, the 12-86-9000 is
supplied in white as the smaller variant.