Salcom 12-86-9000 Product Manual - page 7
P a g e
| 6
12-86-9000 CALLPOINT TRANSMITTER
Product Manual
Sea Air and land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
April 2017
General Configuration
Button Messages: Select the button to view the message, RIC and beep level assigned to that
button. New button settings can be entered, but will not be written until the
program button is pressed. The program button only needs to be pressed
after all button details have been populated.
Frequency:
The transmit frequency between 440 and 470MHz to be set, 25kHz channel
spacing.
Pager Type:
If set to “alphanumeric”, then any message can be set into the message
box, and can only be used with pagers that support alphanumeric
messages. When “numeric” is set then only 0,1,2,3,4,5,6,7,8,9,0,[,],-,E and U
characters can be used. Tone only pagers are supported by leaving the
message box empty.
Beep Level:
Pager beep priority set - 1 highest, 4 lowest.
RIC Code:
Pager ID. Valid codes are 0000008 to 2000000