Salicru SLC ADAPT User Manual - page 6
6
SALICRU
3. QUALITY AND STANDARD GUARANTEE.
3.1. DECLARATION OF THE MANAGEMENT.
Our target is the client’s satisfaction, therefore this Management
has decided to establish a Quality and Environmental policy, by
means of installation a Quality and Environmental Management
System that becomes us capable to comply the requirements de-
manded by the standard
ISO 9001
and
ISO 14001
and by our
Clients and concerned parts too.
Likewise, the enterprise Management is committed with the
development and improvement of the Quality and Environ-
mental Management System, by means of:
•
The communication to all the company about the impor-
tance of satisfaction both in the client’s requirements and
in the legal and regulations.
•
The Quality and Environmental Policy diffusion and the fixa-
tion of the Quality and Environment targets.
•
To carry out revisions by the Management.
•
To provide the needed resources.
3.2. STANDARD.
The
Make Before Break Manual Bypass Panel
product
is designed, manufactured and commercialized in accordance
with the standard
EN ISO 9001
of Quality Management Sys-
tems and certified by SGS body. The
marking shows the
conformity to the EEC Directive by means of the application of
the following standards:
•
2014/35/EU
. - Low Voltage Directive (LVD).
•
2014/30/EU
. - Electromagnetic Compatibility (EMC).
•
2011/65/EU
. - Restriction of Hazardous Substances in elec-
trical and electronic equipment (RoHS).
In case of any modification or intervention over the equip-
ment by the end-user, the manufacturer is not responsible.
Declaration of conformity CE of the product is at the
client disposal under previous request to our headquar-
ters offices.
3.3. ENVIRONMENT.
This product has been designed to respect the Environment and
manufactured in accordance with the
ISO 14001
norm.
Equipment recycling at the end of its useful life:
Our company commits to use the services of authorised societies
and according to the regulations, in order to treat the whole recov-
ered product at the end of its useful life (contact your distributor).
Packaging:
To recycle the packaging, follow the legal regulations in force,
in accordance with the particular norm of the country where the
equipment is installed.