Salus EP101 Instruction manual - Programming The Ep101
PROGRAMMING THE EP101
The EP101 offers great versatility with its programming options, allowing
the user to programme the unit to operate on a 5/2 or 7 day control cycle.
The controller has a default set of programmes that have been designed to
meet the needs of most users. If these default programmes are not suitable
for your particular situation, reprogramming the EP101 with your own
settings is a very straightforward operation.
Selection of the default programming mode (5/2 or 7 day) is made by
changing the jumper setting on the rear of the controller, as previously
described within the Installation section of this manual.
5/2 Day Mode
5/2 day mode is the default programming mode for the EP101. With this
mode selected three different sets of on/off times can be set for Weekdays
or Weekends.
To review or change a programme, press the SET key when the EP101 is in
Normal mode. This will change the unit status to Programme Setting
mode.
The display will show programme number 1 and SET PROG, with all other
indicators cleared. The weekdays will be flashing to indicate they are the
selected item and are ready to be adjusted:
Press the UP or DOWN key to select the
programme set for either Weekday or
Weekend to be reviewed or adjusted.
Pressing the SET key at any time when in
programming mode will return the
EP101 into Normal mode.
EP101 INSTRUCTION MANUAL
12
Salus EP101 Manual 001:89 21/11/10 11:49 Page 12