Salus EP101 Instruction manual - Temporary Override Mode
Temporary Override Mode
The temporary override mode allows the user to override the current
programme settings and turn the heating on for a preset period. This mode
is activated by pressing the +1Hr key.
After pressing the +1Hr key, the controller display will change have the day
numeral flashing to indicate that it is ready to be adjusted, as shown in the
image below:
Each press of the +1Hr key will increase the
duration of the override by one hour, to a
maximum duration of nine hours.
Increasing the setting beyond this level will
roll the setting back to 0 and disable the
temporary override.
Pressing the SET key, or not pressing any keys for more than three seconds
will activate the temporary override mode and the heating will immediately
be turned on. After 10 seconds, the EP101 display will change to a
countdown display showing the amount of time the system will be turned
on for. The MODE indicator will flash in the ON position for the duration of
the temporary override.
The EP101 will go back to Normal mode at
the end of the manual override period.
Cancelling Temporary Override Mode
To turn off the temporary override, press the +1Hr key until the display
indicates 0. Pressing the SET key, or not pressing any keys for more than
three seconds will then disable the temporary override mode.
EP101 INSTRUCTION MANUAL
18
Salus EP101 Manual 001:89 21/11/10 11:49 Page 18