Samick DCP-12 Manual - Master Tune

21

With Octave Shift Edit Mode enabled, press the [Transpose Up and Down buttons 

at the same time.

TRANSPOSE

NOTE

Changes to the Octave Shift setting are not remembered after a power cycle. The 

setting will be back at its default value of zero at power-up.

Master Tune

Although DCP-12 never actually slips out of tune, the Master Tuning function 

can be helpful when playing along with another instrument that may be tuned 

slightly higher or lower than standard pitch.

Adjust the Master Tune Setting

Press the [CHORUS] and [TOUCH] buttons at the same time.

The top line of the LCD will show: MasterTune: -0-

TOUCH

CHORUS

MASTER

TUNE

Use the [DATA CONTROL] knob (or the Transpose Up/Down buttons) to raise 

or lower the Master Tune setting.

DATA CONTROL

NOTE

Changes to the Master Tune value are remembered after a power cycle.

Also note that the Master Tune command is sent to the internal sound engine only. 

It will not affect MIDI sent from DCP-12 to an external MIDI device or software 

program.