Samick DCP-12 Manual - Chorus Effect

25

Change the Reverb Type

While holding the [REVERB] button, use the [TRANSPOSE] buttons to select 

a Reverb Type. The LCD will show the current Reverb Depth and Type.

Once you have selected the desired Reverb Type, let go of the Reverb button, 

and resume playing DCP-12.

REVERB

TRANSPOSE

The following Reverb Types are available:

       01                02        

03      

04      

05       

06      

07         

08      

      ROOM1  

ROOM2  

ROOM3  

HALL1  

HALL2  

PLATE  

DELAY   PANDELAY

Each of the 16 voices of DCP-12 will remember its individual Reverb on/off 

status, Type and Depth setting, even after turning the Power switch off and on.

Chorus Effect

The built-in digital Chorus can be used for adding a rich, swirling stereo effect 

to any of the 16 voices built into DCP-12.

Apply Chorus to a Voice

Press the [CHORUS] button.

The button will illuminate, and you will hear the Chorus effect when you play 

the currently selected voice.

To turn Chorus off, press the Chorus button again. The button will go dark to 

indicate that Chorus is off.

CHORUS

NOTE

Depending on the default Depth setting for the selected Chorus preset, the 

effect may be quite subtle. To hear the Chorus more clearly, you may want 

to increase the Chorus Depth, as described in the next step.