Samick DCP-12 Manual - page 30
Change the Chorus Type
While holding the [CHORUS] button, use the [TRANSPOSE] buttons to select
a Chorus Type. The LCD will show the current Chorus Depth and Type.
Once you have selected the desired Chorus Type, let go of the Chorus button,
and resume playing DCP-12.
CHORUS
TRANSPOSE
The following Chorus Types are available:
Each of the 16 voices of DCP-12 will remember its individual Chorus on/off
status, Type and Depth setting, even after turning the Power switch off and on.
C-1
C-2
C-3
C-4
C-5
C-6
C-7
C-8
CHORUS1 CHORUS2 CHORUS3 CHORUS4 FEEDBACK FLANGER SHTDELAY FBDELAY
26
Adjust the Chorus Depth
While holding the [CHORUS] button, turn the [DATA CONTROL] knob to adjust
the Chorus Depth setting.
The LCD will show the current Chorus Depth and Type
Once you have the desired amount of Chorus, let go of the Chorus button, and
resume playing DCP-12.
CHORUS
DATA CONTROL
NOTE
If you prefer, you may use the Tempo Up/Down buttons instead of the Data
Control knob to change the Chorus Depth (while holding down the Chorus
button).