Samlexpower PSE-12125A Owner's manual - Section 13 |
46 | SAMLEX AMERICA INC.
seCtIOn 13 |
specifications
PARAMeteR
PSe-12125A
PSe-12175A
PSe-12275A
oUtPUt
ouTPuT VolTAgE
120VAc +5% / - 10%
ouTPuT frEQuEncy
60hz ± 5%
60hz ± 5%
60hz ± 5%
ouTPuT VolTAgE wAVEforM
Modified Sine wave
MAXIMuM conTInuouS AcTIVE
PowEr ouTPuT (PowEr
fAcTor = 1)
1250 w*
1750w*
2750w*
MAXIMuM AcTIVE SurgE
PowEr ouTPuT (
fAcTor =1)
2500w*
3500w*
4500w*
PEAk EffIcIEncy
85% to 90%
85% to 90%
85% to 90%
inPUt
dc InPuT VolTAgE
12V battery System (> 10.5Vdc to
MAXIMuM dc InPuT currEnT
no loAd currEnT drAw
320mA
370mA
600mA
MonitoRinG AnD inDicAtionS
dc InPuT VolTAgE, VolTS
colored, 10 level lEd bar graph
dc InPuT currEnT, AMPS
And ASSocIATEd ouTPuT
PowEr, wATTS
colored, 10 level lEd bar graph
oVEr TEMPErATurE
red lEd + buzzer Alarm
oVErloAd
red lEd
red lEd
red lEd
low dc InPuT VolTAgE
buzzer Alarm
buzzer Alarm
buzzer Alarm
PRotectionS
coolIng
Temperature controlled fan
oVEr loAd / ShorT cIrcuIT
• Shutdown if output power > Continuous /
Surge ratings
• Manual Reset: Switch OFF, wait for 3 min and
Switch on
oVEr TEMPErATurE
• Shut Down when temperature of internal hot
spot > threshold
• Automatic reset when unit cools down
hIgh dc InPuT VolTAgE
• Shut down when DC Input Voltage >16.5VDC
• Auto reset when voltage drops below 16.5VDC
low dc InPuT VolTAgE
• Shut down when DC Input Voltage
• Auto reset when voltage rises to > 11.3VDC
low dc InPuT VolTAgE AlArM
• Buzzer alarm when DC Input Voltage
• Auto reset when voltage rises > 10.5VDC