Samlexpower SI-A1-VR1500 Owner's Manual - page 8
OPERATING ENVIRONMENT
For best operating results, the inverter should be placed on flat surface, such
as the ground, car floor, or other solid surface. The power cord allows easy
positioning of the inverter. The inverter should only be used in locations that
meet the following criteria:
DRY- Do not allow water and/or other liquids to come into contact with the
power inverter. In all marine applications, do not install the inverter below or
near the waterline and keep the inverter away from moisture or water.
COOL – Ambient air temperature should be between 30 degrees F (-1 degree
C) non-condensing, and 105 degrees F (40 degrees C). Do not place the
inverter on or near a heating vent or any piece of equipment which is
generating heat above room temperature. Keep the inverter away from direct
sunlight, if at all possible.
VENTILATED – Keep the area surrounding the inverter clear to ensure free air
circulation around the unit. Do not place items on or over the inverter during
operation. A fan is helpful if the inverter is operating at maximum power
outputs for extended periods of time. The unit will shut down if the internal
temperature exceeds operating temperatures. The unit will restart after it
cools.
SAFE – Do not use the inverter near flammable materials or in any locations
that may accumulate flammable fumes of gases.
8