Sampo PME42MAW Owner's Manual - page 15
There are four preset picture modes that you can choose from to optimize the video picture
according to the type of programming you are watching. (1)POLYCOM; (2)USER;
(3)CINEMA; (4)VIVID.
Note:
Note that the default Picture Mode setting is set to “POLYCOM”. This setting is standard mode, which is
optimized (and recommended) for use with Polycom Video conferencing systems for all video inputs. As such,
many of the adjustment sub-settings are “grayed-out” and are not accessible to the user. In order to make
adjustments to these settings, “’Custom” picture mode must be selected.
CONTRAST
Adjust Contrast to increase the level of “White” in the video picture. Increasing Contrast will make white
area of the video picture brighter. Contrast works in conjunction with Brightness.
BRIGHTNESS
Adjust brightness to enhance the level of dark area in the video picture such as night scenes and shadow
scenes. increasing brightness will make dark areas more visible.
COLOR
Use color to adjust the color saturation of the picture. Increasing color will make the color more intense.
Reducing color setting will make the color less intense.
SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting will
enhance the edges of objects in the video picture. Decreasing the setting will reduce enhancement.
TINT
Use Tint to adjust the color of fleshtones. Increasing color will make the picture with more red in
appearance. Decreasing setting in left direction will shift the picture with more green in appearance.
3D NR
To improve the quality of the picture in the case of poor reception.
MPEG NR
To improve the quality of the pictrue in the case of poor reception.
Picture Adjustment
Explanation of Various Picture Control Settings
Press the “Menu” key on the front panel or remote
control and “Down” key to enter Picture menu.
Use “Up/Down” to select the PICTURE Option
from the menu.
Various picture settings are available
from the Picture menu. Use “Left/Right” to adjust
that you wish and press “Exit” key to confirm
selection.
Menu System
1
2
15
PICTURE MODE