Sampo PME42MAW Owner's Manual - page 16
Picture Quality Adjustment
Due to various PC video cards with different specifications, it is likely that the initial video
picture has subtle noise or imperfections. Please use the following procedures to adjust the
picture quality when using under RGB mode
Press “Menu” key on the front control panel or remote control.
Use “Down” key to enter Picture option from the menu.
Use “Up/Down” keys to select AUTO ADJUST option from the menu.
Use “Left/Right” keys to change the setting until your video picture is optimal.
Picture Quality Adjustment-Manual Adjustment
In certain cases, users may desire to manually adjust. To do so, please follow below
procedure. Due to various PC video cards with different specifications, it is likely that the
initial video picture may not fit exactly to the size of the display. Please use the following
procedures to adjust the picture position.
Press “Menu” key on the front control panel or remote control
Use “Up/Down” keys to select H-Position or V-Positon from the menu and press keys to confirm
selection.
Use “Left/Right” keys to change the setting until your video picture is best fit
within the display area.
Fine Tuning Under RGB Mode
Menu System
Explanation of Various Picture Control Settings (con’t)
Use to change various screen width modes. There are three modes to choose from:
(1)16:9; (2) 4:3;
FORMAT
(3)PANORAMA.
AUTO ADJUST
Use AUTO ADJUST to fine-tune the display to perfectly synchronize to the video signal
source under RGB mode.
COLOR TEMP.
Select the COLOR TEMP. for white balance. There are three setting to choose from:
(1)NORMAL; (2)WARM; (3)COOL.
CLOCK
Use clock to fine-tune the monitor to perfectly ADC PLL divider clock ratio synchronize to
the video signal source under RGB mode.
PHASE
Use phase to fine-tune the monitor to perfectly ADC clock phase synchronize to the video
signal source under RGB mode.
V-POSITION
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to
shift the picture down.
1
2
3
4
1
3
4
Use “Down” key to enter Picture option from the menu.
2
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right.
Decrease to shift the picture to the left.
Note:
PANORAMA is only available for AV/S-Video Mode.
16