Samsung AJ040MCJ2EH Installation Manual - Installation Procedure
26
Installation Procedure
English
Instal
lation Pr
oc
edur
e
→
→
→
→
→
→
→
→
6
Press operation button
with the direction of remote control for set.
CAUTION
•
SEG1, SEG7, SEG13, SEG19 are not set as page option.
•
Set the SEG1, SEG7 as ON status and SEG13, SEG19 as OFF status.
‐
Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting
option at the same time.
The procedure of setting option
Operation
Indication
Step 1
1
Remove the batteries from the remote controller.
2
Insert batteries while pressing High Temp Button and Low Temp Button.
Step 2
1
Press Low Fan button to enter SEG2 value.
2
Press High Fan button to enter SEG3 value.
Step 3
Press Mode button to be change to Cool mode in the ON status.
1
Press Low Fan button to enter SEG4 value.
2
Press High Fan button to enter SEG5 value.
Step 4
Press Mode button to be changed to DRY mode in the ON status.
1
Press Low Fan button to enter SEG6.
2
Press High Fan button to enter SEG8.
Step 5
Press Mode button to be changed to FAN mode in the ON status.
1
Press Low Fan button to enter SEG9 value.
2
Press High Fan button to enter SEG10 value.