Sensidyne Gilian 3500 Operation Manual - page 4
Gilian 3500 Air Sampling Pump
REF 360-0039-02 (Rev B)
4
WARNINGS
READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE
Failure to read, understand, and comply with ALL accompanying literature, product labels, and warnings
could result in property damage, severe personal injury, or death.
Read and understand ALL applicable environmental health and safety laws and regulations. Ensure complete
compliance with ALL applicable laws and regulations before and during use of this product.
DO NOT remove, cover, or alter any label or tag on this product, its accessories, or related products.
UNDER NO CIRCUMSTANCES should this product be used except by qualified, trained, technically
competent personnel.
DO NOT operate this product should it malfunction, require repair, or have a cracked or broken case. DO NOT
repair or modify, except as specified in Operation Manual. Service to be performed by Sensidyne Authorized
Service Departments only.
Use ONLY specified Sensidyne parts when performing maintenance procedures described in this manual.
Intrinsic safety certifications become void by substitution of components, unauthorized repair or alteration.
This product is intended for both indoor and outdoor use when protected from splashed or wind blown liquids.
The unit is not waterproof so NEVER submerge the unit in water. Pump failure or faulting may result.
This product uses rechargeable Nickel-Metal-Hydride batteries. ALWAYS fully charge before use. DO NOT
open case, charge or replace batteries in a explosive atmosphere. Use only battery pack and chargers
specified in Operation Manual. DO NOT insert any foreign objects into the battery charging jack. DO NOT
insert any foreign objects into the battery connection slot at the top of the battery pack. Shorting the contacts
will blow the protective fuse. DO NOT operate pump while charging.
If the equipment is likely to come into contact with aggressive substances, then it is the responsibility of the
user to take suitable precautions that prevent it from being adversely affected, thus ensuring that the type of
protection is not compromised. Examples of aggressive substances are acidic liquids or gases that may attack
metals, or solvents that may affect polymeric materials. Examples of suitable precautions are regular checks
as part of routine inspections or establishing from material data sheets that it is resistant to specific chemicals.
DO NOT operate with a dirty or blocked inlet filter or kinked tubing. Pump failure or faulting may result.
Caution: Both charger and battery become warm during charging.
If further translation is required, please contact Goffin Meyvis, the Sensidyne EU Authorized Representative
(see Appendix E for Service contact information).