Sercomm DBC831 Setup Manual - Before You Begin
6
Before You Begin
Checking Doorbell Chime Type (The customers require to develop
their own App to switch the doorbell chime type)
If your existing doorbell produces an electronic sound that is
programmable and comes in the form of a unique sound, it's a digital
chime. If it has a traditional "ding dong" sound, it's a compatible analog
chime.
Charging Doorbell Camera
Use the supplied micro USB cable to recharge the battery while you are
setting the doorbell camera first. After then, turn the doorbell camera
switch (on the back) on. Make sure that the Doorbell Camera
’s internal
battery has received enough power after you
’ve mounted it to your
doorbell wiring.
Wireless HD Doorbell Camera Installation
DBC831 requires connections to a doorbell chime and a transformer.
Simply remove your existing doorbell button and connect one wire on
the Doorbell Camera to the chime and the other wire to the transformer.
Note: Please ensure that the Wireless HD Doorbell Camera is configured and
added to the network before mounting it.
Note: If DBC831 is using for engineering develop purpose, it is available to
use Mirco USB cable to charge the battery for replacing the transformer. And
doorbell does not require to attach with the chimer.
Note: The Micro USB charger is only available on 5V2A adapter plug. Do not
plug Micro USB cable on the PC for charging.
Step 1: Start the APP which customized by customers or the web page
for pairing process.
Step 2: Use the supplied micro USB cable to recharge the battery while
you are setting the doorbell camera first. Add the Wireless HD Doorbell
Camera to your network.
1) Wireless HD Doorbell will detect the Wireless device (AP or router)
which is Disable the Wireless Security automatically.
The default Wireless settings are:
Mode: Infrastructure
SSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
S
e
rc
o
mm
C
on
fiden
tia
l