Sercomm DBC831 Setup Manual - page 8
4
Microphone
The built-in microphone is useful for bi-direction
voice conversation.
PIR LED
The sensor is used to help the camera to detect
motion within 3 meters.
Doorbell/WPS
Button
This button has three functions:
1. WPS. Push the WPS button on the device
and on your other wireless device to perform
WPS function that easily creates an
encryption-secured wireless connection
automatically.
•
WPS PBC Mode. When pressed and
released (up to15 seconds), the Wireless
HD Doorbell Camera will be in the WPS
PBC mode (Auto link mode).
•
WPS Pin Code Mode. When pressed
and held for 5-15 seconds, the Wireless
HD Doorbell Camera will be in the WPS
Pin Code mode.
Note: when WiFi is connected, the WPS
button is disabled.
2. Doorbell. Press the button to ring the bell.
3. Power LED (Green/Amber/Blue)
•
Off (Green/Amber/Blue)- No power or
sleep mode.
•
Breathing (Green)
– Intercom mode.
•
On (Amber) - If the LED is on for 5
seconds, the WPS function is failed.
•
Off (Amber) - WPS pairing is complete if
the LED is off after continuously blinking.
•
Slow Blinking (Amber)
– WPS PBC
function is active.
•
Medium-Speed Blinking (Amber)
– WPS
Pin function is active.
•
Fast Blinking (Amber)
– Driver upgrading
Note:Do not power off the Doorbell while
the driver upgrading.
•
On (Blue) - Power on and PIR function is
triggered.
•
Off (Blue) - The doorbell button is pressed
by a visitor.
Speaker
This is where the visitor hears your speaking.
S
e
rc
o
mm
C
on
fiden
tia
l