SERO BWA-SS-10 User Manual - Room 20
7
2.4.1 Functions
3
Operating Instructions
3.1 General Information
3.1.1 Menu Navigation
3.1.1.1 Display of current operating mode
Control Buttons
˄influence key˅
The control computer is operated with the help of a user friendly menu system that is displayed on the control
panel. There is a main menu and several sub-menus accessible from the main menu. The menus are
described in detail further down.
To be able to select the desired menu and increase or reduce preset values, you will use the five buttons.
•
One button pointing upwards marked with a up arrow
•
One button pointing downwards marked with a down arrow
•
One button pointing to the right marked with a right arrow
•
One button pointing to the left marked with a left arrow
•
One button pointing to the ON/OFF
The right-hand button on the control panel is used to open the desired menu.
The left-hand button is used to return to the previous menu.
The up and down buttons are used to navigate between the parameters of a menu.
A cursor (arrow) on the left-hand side of the display indicates which menu can be opened.
The up and down buttons are also used if you wish to increase or reduce a preset value.
When display at the interface, press button Right for 5 seconds for locking the display (will show a symbol
of lock.) All buttons are not available after lock is active, until press button Right for 5 seconds to open the lock
˗
if the lock is active and then power supply cut off, the lock will be open after power supply resume.
During normal operation, the following information will be displayed:
• Desired (preset) room temperature
• Date / time / timer
heat pump or auxiliary heater or both (see ”Symbols”).
• Which operating mode has been selected.
• Whether there is a heating demand or not. If there is, there will
also be symbols telling which heat source is working,
ROOM 20
OPER. WA R M WAT E R
MONDAY
11:30
1
ROOM 20
OPER. WARMWATER
MONDAY
11:30
1