ServComp 10 User Manual - page 24
IP Phone User manual
- 23 -
§ vfone: Use vfone’s service
● service addr : Please set the URI (domain name/IP address : service port) of the server into
“service addr ”. When the default service port is used, “: service port ” can be omitted. Please
note, if you use SIP protocol,this item will not appear!
If “use service ” is checked, please set the URI of gatekeeper into
“service addr” .The default
service port is 1719.
If “use service” is not checked, to make calls through gateway, please put the URI of the gateway
into “service addr”. To make IP-to-IP call, please clear this field. In both cases, the default service
port is 1720.
● sip proxy : This item only appear in the SIP protocol. Please input the SIP Proxy Server URI
when the use severice item is slected, sure on such condition, please input the SIP Proxy Server
URI or don’t set it anything to domain/realm item.
● domain/realm : This item only appear in the SIP protocol.In genernally, the SIP account is
aaa@bbb.ccc format, bbb.ccc is the SIP PROXY SERVER domain,so please input bbb.ccc part
to the sip domain item. If this item is not setted,the IP Phone will think sip proxy as behind of @
automaticlly.
● nat traversal: When the IP Phone with private IP address need communicate with other IP
Phones in a different LAN or on Internet, please select an item from dropdown list.( Fox IAX2
protocol, it will have not this item)
n
disable: Select this item when the login server and IP Phone in the same LAN, or the login
system supports the IP Phone working behind the LAN.
n
enable: When the system does not support IP Phone working behind the LAN, please select
this item to search public IP address of the NAT device. With this item selected, “nat addr”
field will be activated. Besides, port mapping (port forwarding) needs to be properly set up
on NAT device.
n
citron: With Citron private protocol used, select this item to fit into the GnuGK system
transferring the voice and signal by routed.This item only be used in H.323 protocol.
n
innopath: Select this item with Innopath private system used. This item only be used in
H.323 protocol.
n
vida: Select this item with Vida private system used. This item only be used in H.323
protocol.
n
aivgr: Select this item with aivgr private system used. This item only be used in H.323
protocol.
n
eproxy: Select this item with eproxy private system used. This item only be used in H.323
protocol.