Smartguard AEC-931A2BS User Manual - Time Control:turn The
Manual is about: Motion Sensor Twin Light with Warning Message
of
11
7
Screw A
Please allow 1 minute warm-up time after switching on.
Step 3. Adjusting the Settings (see fig. 8~9)
Time control:Turn the
time control knob to”+” side
to increase the illumination
time (7 minutes max.), turn
the control knob to “-“ side
to reduce the illumination
time (30 seconds min.).
Sensitivity control:Adjust the detector range of Passive
Infrared Motion Sensor (
± 6.56ft ~ 32.8ft)
Selecting working mode:
Mode 1: Suggested setting when out of town
- Light + speaker: all day detection
- Daytime and nighttime: light and speaker are all in operation
Mode 2: Suggested for day to day use
- Light at night + speaker in the daytime
- Daytime: light is off, speaker is on
- Nighttime: light is on, speaker is off
Fig. 7
Fig. 8