1. DL manuals
  2. SmartLab
  3. Pedometer
  4. walk
  5. User Manual

SmartLab walk User Manual

Other manuals for walk: User Manual
Manual is about: 3-D Step-counter

Summary of walk

  • Page 1

    User manual d45400-08-0 1-02_r3_28/06/20 10 hmm diagnostics gmbh d-69221 dossenheim, germany www.Hmm.Info 3-d step-counter please read this user manual thoroughly before first using this device.

  • Page 3: Content

    Content i. Introduction 4 ii. Your smartlab ® walk 5 display & functions 5 specifications 5 iii. Setup & functions 6 inserting the battery 6 mounting the carrying cord 7 before the first use: 8 setting weight, step length, signal tone und time: 8 starting up 11 memory function 11 additional function...

  • Page 4: I. Introduction

    4 i. Introduction thank you for using the smartlab ® walk 3-d step counter. Because of its small and handy form and its appealing design, this device suits best your needs for the control of walked distances. Because of the integrated 3-d sensor technology, this device counts normal steps as well as...

  • Page 5: II. Your Smartlab

    5 ii. Your smartlab ® walk display & functions specifications name: smartlab ® walk size: 70 x 37 x 8,5 mm weight: 24 g battery: 1 x cr 2032 battery unit for steps walked: m unit weight: kg / lb key lock symbol mute symbol clock on/off, select menu, display steps select settings, change settings wal...

  • Page 6: III. Setup & Functions

    6 iii. Setup & functions inserting the battery in order to change/ insert the battery, you need to unscrew the battery lid on the back of the device. Place the coin cell with the plus side to top into the opening. If you change the battery, use the screwdriver to lever off the battery. Afterwards, p...

  • Page 7: Mounting The Carrying Cord

    7 mounting the carrying cord you can wear your smartlab ® walk with the carrying cord included in the set. To do so, you will have to connect the cord to the device by doing the following steps: push the thin end of the cord through the two tiny eyes at the back side of the device. Pushing together ...

  • Page 8: Before The First Use:

    8 before the first use: before first using your smartlab ® walk step counter, please hold the „disp/ set“ button pressed for more than 3 seconds. The device will enter the setting mode. Setting weight, step length, signal tone und time: setting weight: 1. Press the “m/” button and choose between „k...

  • Page 9

    9 after having set your personal weight, press „disp/ set“ to confirm. Setting step length: after you entered your body weight, step length symbol flashes. Now you can enter your step length by pressing the “m/” button. The step length can vary between 30 and 120 cm. After having set your correct s...

  • Page 10: Smartlab

    10 setting time: after that, your device enters time setting mode. Press the “m/” button in order to switch between the two display modes 12h and 24h (24h mode is preset). By pushing „disp/ set“ button you can set the time. First you set the hours by pushing the “m/” button. Confirm by pushing „di...

  • Page 11: Starting Up

    11 starting up • after having set time and step length, you can use your smartlab ® walk step counter. Just take the device and start walking. The device will turn on automatically when it registeres a movement. The display will read “hello” • after the 12 th step, the counter starts and the lcd dis...

  • Page 12: Additional Functions

    12 and the calory consumption. Note: once you have walked 99999 steps, the device stops counting your steps. The lcd display will start twinkling and reset after the time setting was set back to 0:00. Additional functions battery-display: when the low battery symbol appears in the display, your smar...

  • Page 13: Smartlab

    13 activates key lock. This is shown by the according display symbol. By push- ing the „disp/ set“ button, you can unlock the device. Display-power-off: when you are in user mode, your device automatically turns off after 2 minutes of non-use. When your smartlab ® walk is picked up and used again, t...

  • Page 14: Warranty

    14 warranty hmm diagnostics gmbh products need to fulfill high quality requirements. Because of this reason, hmm diagnostics gmbh gives a 2-year warranty by purchasing this smartlab ® product. You can even extend the warranty from 2 to 5 years without extra pay when you register your product. Please...

  • Page 15: Www.Smartlab.Org

    Hmm diagnostics gmbh friedrichstr. 89 d-69221 dossenheim, germany mail: info@hmm.Info www.Hmm.Info manufacturer: weitere informationen zu den smartlab ® produkten / more information on our smartlab ® products: www.Smartlab.Org.