SmartLab walk User Manual - Smartlab
13
activates key lock. This is shown by the according display symbol. By push-
ing the „Disp/ Set“ button, you can unlock the device.
Display-power-off:
When you are in user mode, your device automatically turns off after 2
minutes of non-use. When your
smartLAB
®
walk is picked up and used again,
the display will read „HELLO“.
Maintenance
• Do not dump the device or use force while operating it
• Avoid exposing the device to high temperatures or direct sunlight.
• Do not immerse in water, since this might cause irreparable damage.
• Let the device acclimate after having stored it in a temperature close to
zero. Do not immediately use it in such a condition.
• Do not try to disassemble the device.
• If you do not use the device for a longer time, please take out the
batteries.