SmartLab walk User Manual - Before The First Use:
8
Before the first use:
Before first using your
smartLAB
®
walk step counter, please hold the „Disp/
Set“ button pressed for more than 3 seconds. The device will enter the
setting mode.
Setting weight, step length, signal tone und time:
Setting weight:
1. Press the “M/” button and choose between „kg“ and „lb“. In order to
confirm your choice, please press the „Disp/ Set“ button.
2. After you chose your unit, the weight indicator will flash. Now you
can enter your personal body weight and confirm by pressing the
“M/” button. The possible weight range is between 30 and 200 kg.
With the “M/” button you can adjust your weight. You can
only increase the value. After reaching the maximum level of 200 kg,
smartLAB
®
walk will start with 30 kg again.
By keeping the “M/” button pushed, the weight value increases faster.