Smartswitch SMS-2 Installation Manual - page 9
9
Removing a Administrator
Command:
Remove admin
The system responds with:
The administrator number and feature has been removed
Note: this completely removes the administrator from the user list, it does NOT move the user down
a security level to normal “user” unless the administrator is the only number in the system in which
case it will move the user from administrator to user.
The system responds with: This number has been changed from administrator to a user
Get a list of all the Masters
Command:
User list
The system responds with:
User list is: +??XXXXXXXX +??XXXXXXXX … (up to 5 numbers inc owner)
If there are too many numbers to display in one txt, a second txt will be sent showing
the last two numbers
First text followed by:
+??XXXXXXXX +??XXXXXXXX +??XXXXXXXX …
Turn programmed numbers lookup on or off
Command:
User lookup on (or) off
(System default = On)
If User lookup is On the SMS-2 will only respond to numbers that have been programmed into
the unit using the Master Add command as per above.
If User lookup is Off the SMS-2 will respond to any number that sends the correct command.
The system responds with:
The user lookup list feature has been turned on and the unit will only accept
commands from programmed users
OR
The user lookup list feature has been turned off and the unit will only accept
commands from any users
PLEASE NOTE: Input changes will only be sent to users that have been programmed into the unit.
Text all programmed numbers on or off
Command:
Text all on (or) off
(System default = On)
If Text all is On the SMS-2 will text all user that have been programmed into the unit with the
reply to the command.
If Text all is Off the SMS-2 will only text the number that initiated the command with the reply.
The system responds with:
All users in the list will now receive notification texts ( On )
OR
Only the number sending the text command will receive notification text ( Off )
PLEASE NOTE: This command does not affect the inputs all Input changes will only be sent
to users that have been programmed into the unit.
Smart Switch SMS-2 Installation & Operation Manual