Smartview TX User Manual - Reading A Document
For the smallest possible magnification, slide the
knob fully towards the back of the unit. For the
greatest possible magnification, slide it to the front.
4.
READING A DOCUMENT
To read a document, set the Size control for the
smallest magnification that allows characters to be
comfortably and clearly seen. This will allow the
best reading speed. As you read, move the reading
table to the left, so the text moves across the screen
at a comfortable speed.
If you are reading a thick object such as a book or a
bottle label, you may have to re-adjust the Focus
control to compensate for the extra height.
Reading Table Controls
Margin stops allow you to return quickly to the left
and right edges of the text. To set the left margin,
position the table so that the left margin of the text
is on the screen. Slacken the left-hand margin knob
at the front of the reading table, slide the knob as
far as it will go to the right, and then tighten the
knob. Use a similar procedure for the other margin
stop.
If you are not using the margin stops, move them to
their outermost positions. You can stop the