Smartview TX User Manual - Introduction
1.
INTRODUCTION
SmartView is an electronic magnifying system. It
will enlarge printed material, handwriting or
photographs placed on the moveable table. The
controls are simple and easy to use.
This manual describes the following SmartView
model: TX (monochrome).
2.
SETTING UP
You will require a television set with an A/V video
input socket. The TV may be an NTSC type, or a
multi-standard set capable of operating on the
NTSC standard. A 14 inch (356 mm) set may be
placed on top of the reader unit. A larger TV
should be placed beside the reader or on a suitable
platform.
Locate the AC power cable supplied with the
SmartView and plug it into the socket labeled
"INPUT POWER" on the back of the reader unit.
Plug the other end into a wall socket.
Locate the video cable which is provided. Plug one
end into the RCA socket on the back of the reader
unit, labeled "MONO VIDEO OUTPUT". Plug the
other end into the A/V input of the TV. Plug the TV