SmartWitness KP1S Installation Manual - page 8
www.smartwitness.com
Connecting 3G Cellular Modem (optional)
Connect the male USB port from the 3G Modem into the female USB port as seen in picture below.
Secure the male/female USB connection with the provided silicone cold shrink tape. The tape is self-
fusing and does not require heat to be applied. It stretches 300% and is fully fused within 24 hours
after application. It is best to stretch the tape, start from one end and overlap at an angle until you
reach the other end of the connector.
Secure the male/female USB connection with the provided silicone cold shrink tape. The tape is self-
fusing and does not require heat to be applied. It stretches 300% and is fully fused within 24 hours
after application. It is best to stretch the tape, start from one end and overlap at an angle until you
reach the other end of the connector.
Model # INT3-GB