Smc corp brush cutter user’s manual smc corp no.8, wu ying s. Rd., pu xin, chang hwa, 51010, taiwan tel : +886-48285327 fax : +886-48285324 2011/09/01 print in taiwan sbc-2800 series sbc-2600 series sbc-2400 series kbc-2600 series shoulder type swivel fuction knapsack brush cutter.
Thank you very much for purchasing our brush cutter ! Our top priority is customer safety. Before use, please be sure to read this manual which explains safety procedures, assembly of the machine and instructions for use, etc. Please use the machine safely and efficiently at all times. If you have a...
(3) working time: 1-1. Work 2 hours or less a day. 1-2. Fatigue is the biggest factor in accidents. Take a 10-20 minute rest for every 30-40 minutes of work. (4) starting the engine: 1-1. Check the area within a 15m radius before starting the engine. Do not let the blade touch the ground, stones or ...
(2) attire: 1-1. Wear comfortable clothing. 1-2.Wear gloves during operation. 1-3. Wear a cap or helmet. 1-4. Wear dust – proof glasses to protect the eyes. 1-5. Use proper protective accessories (i.E. Earplugs) to protect the ears. 1-6. Wear safety shoes. 4. After operating (1) after use care: 1-1....
Brush cutter contructions sbc-2800 series sbc-2600 series sbc-2400 series kbc-2600 series trigger type throttle lever engine hunger bike type handle loop type handle 3t blade gear case 2t blade safety guard standard type throttle lever aluminum main pipe backrest engine soft tube gear case.
Assembely shoulder brush cutter step-2 join the handle to the brush cutter attachment. Fitting bolts x 4 pcs step-1 install the engine to the brush cutter attachment. Fitting bolts x 4 pcs step-3 1. Passing the throttle wire with the round the main pipe grip, attach the assembly to the engine. 2. Fa...
Assembely knapsack brush cutter step-1 1. Install the soft pipe to the engine. 2. Join the wire of throttle lever & engine. 3. Turn the throttle wire round from the muffler side. 4. Secure the lead wire/throttle wire to the machine, using the wire band. Step-3 1. Join the soft pipe with main pipe. F...
Inspections before starting engine █ fuel for 2 - cycle engine ---kawasaki mitsubishi. Use regular car gasoline mixed with special 2-cycle engine oil as fuel. Gasoline: special 2-cycle engine oil (jaso fe class) mixing ratio (volume ratio) 50:1 (kawasaki tj27e / tj45e ) / mitsubishi tb43 25:1 mitsub...
Stop engine █ push stop botton. Inspection & maintenance 1. Cleaning the air cleaner. Clean the element with white kerosene. Then soak it in engine oil and squeeze it firmly with one hand. 2. Cleaning and inspections of each part ･clean the section around the muffler. ･clean the cooling fin and suct...
Trouble shooting e n g i n e malfuctions cause remedies the engine does no start or is difficult to start. ● 1. The machine is not switch on. 2. The fuel is empty. 3. No enough priming. 4. The engine sucks excessive fuel. 5. Old fuel is being used. 1. Switch the machine on. 2. Refuel the tank. 3. Pr...
