SMC Networks SBC-2400 series User Manual - Fuel For
INSPECTIONS BEFORE STARTING ENGINE
█
Fuel for
2
- cycle engine ---KAWASAKI MITSUBISHI.
Use regular car gasoline mixed with special 2-cycle engine oil as fuel.
Gasoline: special 2-cycle engine oil (JASO FE Class)
Mixing ratio (volume ratio)
50:1 (Kawasaki TJ27E / TJ45E ) / MITSUBISHI TB43
25:1 MITSUBUISHI TU26
█
Do not use old or contaminated fuel (smells acidic) or fuel with a different mixing ratio.
This will cause engine trouble when starting or low output power.
█
If the fuel spilt, be sure to wipe it up. If not, it might stain clothing or cause injury.
█
Do not use 4-cycle engine oil.
It may result in a damaged plug, piston right adhesion or clogged muffler.
█
Use gasoline paying special attention to damage from explosion or fire.
█
Fuel for
4
- cycle engine --- HONDA
1. Use regular car gasoline 86 to 98.
2. Add the 4 –cycle oil into HONDA engine.
START ENGINE
START ENIGNE
1. Move the choke lever to the CLOSE position.
To start engine a warm engine, leave the choke lever in the OPEN position
2. Push the priming bulb 3~5 times.
3. Pull the STARTER GRIP, let engine star.
WARNING
OPEN
CLOSE
STARTER GRIP