SPRT SP-RMT9 BT User Manual - page 10
The setting parameters won’t be saved if you directly press the
【
POWER
】
button to turn off
the printer.
3.2.7 Battery Charging
The battery will run out after a period of usage. When it nearly runs out, printer will give a
alarm through the battery indicator flashing, at this time, user needs to charge up the battery.
The charging method is as following: connecting the adapter to the power socket with 220V,
50HZ, then plug the power charging plug to the power socket of the printer, so the power
charging begins. During the course of power charging, the charging indicator
【
CHARGE
】
goes red, and
【
CHARGE
】
turns to blue when the charging is full. It takes about 3 hours to
charge up the battery. Using the printer during the course of charging power will make the
charging time go longer. It shows the failure if the charging indicator
【
CHARGE
】
goes blue and
red during the course of charging. Such as faulty installation of battery, faulty contact of battery
or internal temperature of battery is too high or too low.
3.3 Printer Parameters Setting
Users can set more parameters by using the specified
〈
T9 Setting Tools
〉
software through
computer. The setting includes: language
、
font
、
printing density
、
default code page
、
bluetooth
device name and password etc. The setting method please refer to the Software Help>, offered with the software together. 3.4 Printer Interface Connection and Printing 3.4.1 USB Connection The SP-RMT9 printer of standard accessories includes Mini USB cable which connects printer. The USB type belongs to the slave device type. 3.4.2 Bluetooth Connection Handheld device, laptop and other information terminal devices with Bluetooth can drive SP-RMT9 to print by the Bluetooth interface. SP-RMT9 portable printer is compatible with Bluetooth2.0 standard. Power class is CLASS 2, effective communication distance is 10meters. The Bluetooth of the printer belongs to the slave device. The initial name of the printer is SP-RMT9 Printer, the initial password is ‘1234’; users can change the printer name and password by using Setting Tools>.